Installing A Mustang II Kit Part VI

Once the basic kit is welded in place all that's left is to bolt on all the stock Mustang components.

Here you can see all the components in place. I used a conversion kit from Speedway Motors, which mounts 11" GM disk brakes and calipers. Note how the Mustang strut rods mount in the "very strong" brackets.

Looks pretty good all together. I didn't install the shocks at this time since everything will have to be removed when I paint the frame.

The truck now sports a pair of '69 Camaro rally wheels. The rear will get a set as well, although a little wider.

Looks a lot better than it did with that 50-year-old solid axle setup. This will ride and stop a whole lot better too.